Xerox Phaser 7500DN User Manual

Troubleshooting
Phaser 7500 Color Printer
User Guide
134
Entire Page Prints Black or Color
Image Prints Too Light
Probable Causes Solutions
One or more of the the imaging units may be
defective.
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Probable Causes Solutions
The density is too light. Select a darker copy density.
The paper is moist from humidity. Remove the paper and try a fresh ream.
Media type is set incorrectly. When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See Supported Media on
page 55.
The printer needs to be calibrated. Perform the color calibration procedure. For more
information see Setting Color Calibration on
page 131.

Xerox Phaser 7500DN Specifications

General

Brand	Xerox
Model	Phaser 7500DN
Category	Printer
Language	English