Xerox Phaser 7760 User Guide

Solving Print-Quality Problems
Phaser® 7760 Color Laser Printer
4-13
Poor Transparency Print Quality
Problem
Print-quality defects are occurring on the transparency film:
■ Light and/or dark spots.
■ Smeared toner
■ Light bands on the print
Caution: Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies
.
Solution
1. Using non-recommended transparency film can cause print-quality problems or damage
the printer’s fuser. See the Recommended Media List at www.xerox.com/paper
.
2. Verify that the paper is properly loaded in the tray, and that
Transparency is the selected
paper type in the
Paper Tray Setup menu. See Loading Paper on page 3-9.
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English