Xerox Phaser 860 User Manual

20
Phaser 860 Color Printer
Loading Trays
4. Slide the ream of paper into the tray so that the paper rests up
against the angled paper stop at the rear of the tray. The stack of
paper should assume the same angle as the paper stop.
Note
Don't load paper above the fill line on the left side of the tray.
Note
If you are loading letterhead and printing on one side of the
paper, place the paper face up with the letterhead toward the
front of the tray. For two-sided jobs, place the letterhead
paper face down with the letterhead toward the back of the
tray.
5. Remove any sheets that are damaged.
0726-10
0726-77

Xerox Phaser 860 Specifications

General

Brand	Xerox
Model	Phaser 860
Category	Printer
Language	English