Xerox Phaser 860 User Manual

User Guide
75
Specifications
Specifications
Material Safety Data Sheet for ColorStix
®
II Ink
SECTION 1- PRODUCT IDENTIFICATION
Trade Names Xerox Part No.
ColorStix
®
II Ink, Black 016-1902-00, 016-1902-50
ColorStix
®
II Ink, Cyan 016-1903-00, 016-1906-00
ColorStix
®
II Ink, Magenta 016-1904-00, 016-1907-00
ColorStix
®
II Ink, Yellow 016-1905-00, 016-1908-00
Four color "rainbow" pack 016-1909-00
Supplies Start-up Kit 860 SS 00, 860 SS 01
Product Use: XEROX Phaser
®
860 color printers
SECTION 2 - INFORMATION ON INGREDIENTS
Xerox Phaser
®
860 ColorStix
®
II are a proprietary blend of polyethylene and
fatty amide waxes, resins, and dyes. The specific identity of ingredients is
withheld as a trade secret.
ColorStix
®
II solid inks are considered articles under Hazard Communication
regulations. This Material Safety Data Sheet is provided as a customer service.
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Skin
POTENTIAL HEALTH EFFECTS
Immediate Effects: None are known, when used as intended in Phaser
®
860
Color Printers. See Section 11 for toxicology test information.
Chronic Effects: None are known
SIGNS AND SYMPTOMS OF EXPOSURE: None are known.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None are known.
SECTION 4 - FIRST AID MEASURES
EYES: Contact unlikely. If particles get into eyes, flush thoroughly with water.
INGESTION: Not applicable
INHALATION: Not applicable
SKIN: Wash skin thoroughly with soap and water
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: > 221 degrees C (>429 degrees F), Pensky-Martens closed
tester
FIRE & EXPLOSION HAZARDS: These inks will burn. During a fire, irritating
and toxic gases may be generated by thermal decomposition or combustion.
EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are
effective, including dry powder(s), carbon dioxide, and halon.

Xerox Phaser 860 Specifications

General

Brand	Xerox
Model	Phaser 860
Category	Printer
Language	English