Xerox Phaser 860 User Manual

44
Phaser 860 Color Printer
Print Quality
All four color bars are missing in the test print
1. If needed, clean the Rapid Release Guide; see page 62 for
instructions.
2. If needed, clean the wiper blade on the maintenance drawer; see
page 65 for instructions.
3. Inspect the printer's paper-exit area for debris. If needed, clean the
exit rollers; see page 66 for instructions.
4. If needed, clean the printhead and print a test print.
a. Select Eliminate Light Stripes on the front panel (as
described on page 43) or on the Troubleshooting tab in the
driver.
b. Examine the test print.
c. If there is still a color band missing, repeat Steps a and b.
Repeat up to three times in a row, if necessary.
5. If the problem persists:
a. Turn off the printer for at least 4 hours.
b. When you turn on the printer, print the Diagnostic Pages
and, if necessary, select Eliminate Light Stripes.
1 2 3 4 6 7 8 9 1011 12 1314 15 16 1718 19 2021 22 23 2425 26 2728 29 30 3132 33 34 3536 37 3839 40 41 4243 44 45 4647 48 4950 51 52 5354 55 5657 58 59 6061 62 63 6465 66 6768 6970717273747576777879808182838485868788
5
1234
5
6 7 8 9 10 1112 13 14 1516 17 1819 20 21 2223 24 25 2627 28 2930 31 32 3334 35 3637 38 39 4041 42 43 4445 46 4748 49 50 5152 53 54 5556 57 5859 60 61 6263 64 6566 67 68 6970 717273747576777879808182838485868788
1234
5
6 7 8 101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 7374 75 7677 78 79 8081 82 83 8485 86 8788
1234
5
6 7 8 9 10 1112 13 14 1516 17 1819 20 21 2223 24 25 2627 28 2930 31 32 3334 35 3637 38 39 4041 42 43 4445 46 4748 49 50 5152 53 54 5556 57 5859 60 61 6263 64 6566 67 68 6970 717273747576777879808182838485868788
0726-86

Xerox Phaser 860 Specifications

General

Brand	Xerox
Model	Phaser 860
Category	Printer
Language	English