Xerox Printer User Manual

HOST FORMS DESCRIPTION LANGUAGE
Parameters C
y
specifies the y–axis coordinate for the box origin location.
C
x
specifies the x–axis coordinate for the box origin location.
units indicates the unit of measure for specifying the box origin.
The
units are INCHES, CENTIMETERS, DOTS, and XDOTS. You
can use two decimal places when you specify inches and
centimeters. You must express DOTS and XDOTS in integers.
The number of boxes you want to draw is
n .
IN
units is a shorthand method of specifying units for the entire
command. IN
units overrides all other units used. For example,
if you want to draw a box using inches but specify grid FMT1, IN
INCHES uses inches as the grid for all units in the specific BOX
statement.
The width of the box you have specified is
p.
The height of the box you have specified is q .
SOLID, BROKEN, or DOTTED specifies the type of line.
HAIRLINE, 0 point (invisible), 1 point, or 2 points specifies the
thickness of the line for your box.
INK
n specifies the INK number you selected from the ink list to
draw the line in color for use on a Xerox highlight or full color
LPS printer. You may specify the same, or different, ink numbers
for the outline of the box.
FILL and INK
n specifies the ink you want to use to fill a box.
The box fill can be a color or a tint of color. The ink you specify
must be defined in the ink list of the INK command.
SHADING specifies shadowing: LIGHT, MEDIUM, or HEAVY.
REPEAT specifies that you want a box repeated according to the
following commands.
HORIZONTALLY or VERTICALLY specifies the orientation of the
repeated boxes.
EVERY C
i
indicates that you want a box repeated at the
increment (C
i
) you have specified.
AT C
a
indicates the absolute x or y coordinate where you want
the box repeated in a horizontal or vertical direction.
Defaults SOLID, if you do not specify the line type.
1, if you do not specify the line weight or shading.
0, if you do not specify the line weight but do specify shading.
MEDIUM, if you do not specify the degree of SHADING.
HORIZONTALLY, if you do not specify the REPEAT orientation.
When you specify a box and shade with one command and do
not specify a line type for your box, your box will be shaded but
you will not have a line around it.
Examples Long form:
AT 4,6 DRAW 4 BOXES 14 WIDE BY 4 HIGH USING SOLID
HAIRLINE INK 2 AND REPEAT EVERY 5;
Short form:
AT 4,6 BOX 14 WIDE BY 4 HIGH;
3–16 HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS

Xerox Printer Specifications

General

Brand	Xerox
Model	Printer
Category	Printer
Language	English