4 Copying
70
Viewing the Job Limits and the Total Number of Copies/Prints
If you have logged in under any user ID other than the System Administrator's ID, you
can view the copy/print job limit set for the user ID, and the current number of copies/
prints made under the user ID.
1.
Log in to the machine under a user ID.
For information on how to log in to the machine, refer to
Logging in to the Machine
on page 68
.
2.
Press the required buttons on the Control Panel.
To view the copy job limit set for the user ID
Hold down the <6> button, and while holding down the <6> button, press the
<Stop> button.
To view the current number of copies made under the user ID
Hold down the <7> button, and while holding down the <7> button, press the
<Stop> button.
To view the print job limit set for the user ID
Hold down the <8> button, and while holding down the <8> button, press the
<Stop> button.
To view the current number of prints made under the user ID
Hold down the <9> button, and while holding down the <9> button, press the
<Stop> button.
If the displayed value has more than three digits
The following describes how a numerical value, which has more than three digits,
appears in the Display.
NOTE: The value shown in this example is “21100”.
1.
First two digits of the value appears in
the Display.
2.
After four seconds, the second half of
the numerical value appears
sequentially in the Display.
3.
After another four seconds, the
machine enters the Copy Mode, and [1]
appears in the Display.
To Next Page
Loading...
Need help?
General
