11
Control Panel
6. Preset Reduction/Enlargement: Press this key to select any of the
preset reductions or enlargements.
7. Variable Percentage Indicator: Lights when a variable percentage is
selected.
8. % Key: Press this key to display the selected reduction/enlargement.
9. Variable Percentage: Press the Variable Percentage key to increase
or decrease the reduction or enlargement by 1% increments.
10. Display Window: Copy quantity, reduction/enlargement settings, and
status codes appear in this area.
11. Quantity Keys: Select up to 100 copies. Press the right-hand key to
increase the quantity by one. Press the left-hand key to increase the
quantity by 10.
• To display the number of copies requested during the copy run
press the left-hand key.
• Press the Clear key to clear the selected quantity.
12. Clear: Press this key once to stop the copier while making copies or to
clear copy quantity. If the key is pressed twice all programming will be
cleared.
13. Start: Press this key to begin copying.
• The display will change to 1 and increases by 1 as each copy is
made.
14. Ready Indicator: When the light is flashing after the Start key is
pressed, the copier is warming up and copying will begin automatically.
When the light is ON (not flashing), the copier is ready to make copies.
To Next Page
Loading...
Need help?
General
