Xerox XC811 User Manual

31
Copier Care
Cleaning the Transfer Corotron
If copies start getting streaks or blotches, the transfer corotron may be
dirty.
1. Press the release lever to open the
copier.
2. Remove the green transfer corotron
cleaning tool from inside the copier (on
the right-hand side near the front) and
insert it into the transfer corotron unit.
3. Wipe the corotron wire with the tool as
shown in the figure.
4. Replace the tool and close the copier.

Xerox XC811 Specifications

General

Brand	Xerox
Model	XC811
Category	Copier
Language	English