14
Loading Copy Paper
4. Fan the copy paper and insert it into the
tray.
• Ensure that the paper corners are
under the corner snubbers.
• Do not fill above the max line.
5. Close the Paper Tray.
Flashing
will flash in the copy quantity display and the green indicator in the
copier diagram will flash when:
• the paper tray is empty.
• paper has not fed all the way into the copier.
• the paper tray is not closed properly.
If the paper has misfed, open the paper tray and remove the misfed paper.
• Do not reuse the misfed paper.
• Ensure that the paper is under the corner snubbers.
• Close the paper tray. To cancel the flashing P without restarting
copying, press the Clear button or to make the remaining copies
press Start.
To Next Page
Need help?
General
