Xerox XC811 User Manual

26
Customising Your Copier
Programmable Features
The default settings for various copier features may be changed to suit
your needs.
Each of the programmable features, along with its program number and
options are contained in the chart below. The procedure to change these
settings follows the chart.
Feature Prog-
ramme
No
Option Number
* Default
Priority Tray: This feature allows you
to set the default paper tray.
00 – Main Tray *
1 – Alternate Paper
Tray
Auto Clear Time out: This feature
allows you to select the time it takes
for the copier to return to the normal
copy mode after a copy cycle is
complete.
1 0 – Off
1 – 30 seconds
2 – 60 seconds *
3 – 90 seconds
4 – 120 seconds
Time out to Power Save: This
feature allows you to select the delay
before the machine switches into
Power Save mode.
2 0 – Off*
1 – 45 seconds
2 – 90 seconds
3 – 2 minutes
4 – 5 minutes
Time out to Power Shut-off: This
feature allows you to select the delay
before the machine switches into
Power Shut-off mode.
3 0 – 2 minutes
1 – 5 minutes
2 – 15 minutes
3 – 30 minutes
4 – 60 minutes
5 – 120 minutes
6 – Off*
Default Magnification: This feature
allows you to make copies sli
g
htly
lar
g
er or smaller than the ori
g
inal, or
the same size.
4 0 – 100% *
1 – 99%
2 – 101%
Default Exposure: This feature
allows you to select the default
Exposure mode.
5 0 – Auto Exposure *
1 – Text

Xerox XC811 Specifications

General

Brand	Xerox
Model	XC811
Category	Copier
Language	English