27
Feature Prog-
ramme
No
Option Number
* Default
Manual Exposure Adjustment: The
copy exposure ran
e may be adjusted
when the copy ima
e is consistently
too dark or too li
ht. This pro
ram is
used to select lon
-term copy density
changes.
6 0 – +4 steps light
1 – +3 steps light
2 – +2 steps light
3 – +1 step light
4 – Normal *
5 – + 1 step dark
6 – +2 steps dark
7 – +3 steps dark
8 – +4 steps dark
Paper Trail Ed
e Deletion: Ed
e
deletion can be turned off to
accommodate ori
inals that have print
to the bottom ed
e (trail ed
e). When
Off, another 4 mm will copy. The
ima
e quality may deteriorate if
printed to the bottom.
7 0 – On *
1 – Off
Paper Tray Bypass Auto Start:
When enabled, the copier will be
in to
copy as soon as paper is fed into the
paper tray bypass.
8 0 – On *
1 – Off
Set Document Feeder Auto Start
When enabled, copyin
will be
in
when paper is placed in the SDF.
9 0 – On *
1 – Off
Reduction / Enlargement Preset:
This feature allows you to set a preset
reduction or enlar
ement settin
for
the
key.
10 70 – 141%
Default 70% *
Set Document Feeder Exposure
Adjustment: The copy exposure
ran
e may be adjusted when the copy
ima
e is consistently too li
ht or too
dark.
12 0 – +4 steps light
1 – +3 steps light
2 – +2 steps light
3 – +1 step light
4 – Normal *
5 – +1 step dark
6 – +2 steps dark
7 – +3 steps dark
8 – +4 steps dark
Note: The procedures written in this manual are based on the default
settings.
To Next Page
Loading...
Need help?
General
