12
Copy Paper Specifications
Paper Storage
Note: Paper affected by humidity, and curled paper can cause jams and
copy quality problems.
For reliable copier operation and good copy quality, Xerox recommends
that paper be stored:
• on a flat surface.
• in a closed container.
• in a low humidity area.
• tightly wrapped, if the ream is partially used.
The specifications chart below gives you information about the types of
paper that can be used.
Copy Paper Input Paper Tray 1 Alternate Paper Tray /
Bypass Tray
Paper Sizes
A5 to 216×356mm 89×140 to 216×356mm
Paper Weights
Optimum
Range
80 gsm
56 to 90 gsm
80 gsm
52 – 130 gsm
Paper Capacities:
Copy, letterhead,
and predrilled
XC830
XC811/ XC822
XC855
XC1033/ XC1044
XC1045/ XC1245
XC875
80 gsm
100 sheets
250 sheets
250 sheets
250 sheets
80 gsm
single sheet
single sheet
50 sheets
Labels and
Transparencies
No Yes (1 at a time)
* Use labels and transparencies specifically designed for copiers.