33
A1 – A2 Set Document Feeder Misfeed
When a misfeed occurs in the SDF, the red SDF misfeed indicator flashes
on the Copier Diagram, and an A1 or A2 status code will flash in the
display window. The status code indicates the number of originals that
must be returned to the SDF after clearing the misfeed.
A1 status code- refeed the last original.
A2 status code- refeed the last 2 originals.
This code will disappear when copying is resumed or the clear key is
pressed.
Details for clearing misfeeds are given below.
SDF Input Misfeed
1. Pull the misfed original(s) toward the right
to remove them from the SDF input tray.
Refeed the number of originals indicated.
2. Open and close the document cover to
clear the misfeed indicator.
3. Press Start to continue copying.
SDF Exit Misfeed
1. Remove all originals from the SDF exit
tray. Refeed the number of originals not
copied.
2. Open and close the document cover to
clear the misfeed indicator.
3. Press Start to continue copying.
SDF Roller Misfeed
1. Open the document cover and turn the
green roller rotating knob in the direction
of the arrow to remove any misfed
originals. Refeed the number of originals
indicated.
2. Open and close the document cover to
clear the misfeed indicator.
3. Press Start to continue copying.
To Next Page
Loading...
Need help?
General
