XFX nForce 780i 3-Way SLI Motherboard
12
IDE
Serial ATA II
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
CMOS jumper settings
See Figure 1 on page 5 to locate the connectors and jumpers referenced in the
following procedure.
Power Connections
To support 3-way SLI, this motherboard has the following specific power
supply requirements:
Minimum 1000 W peak power
Six 6-pin (3x2) PCI-E power connectors (see Figure 3):
6-pin (3x2) PCI-E connector
Figure 3. Power Supply Connectors
Make sure you have enough power to cover all the expansion cards you will be
installing. To determine what you power requirements are for your specific
configuration or a certified power supply vendor, refer to
www.slizone.com
.
To Next Page
Loading...
Need help?
General
