XFX nForce 780i 3-Way SLI User Manual

Configuring the BIOS
53
OnChip IDE Channel0 [Disabled]
x Primary Master PIO Auto
x Primary Slave PIO Auto
x Primary Master UDMA Auto
x Primary Slave UDMA Auto
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
 OnChip IDE Channel0
Use this function to enable
or disable the onchip IDE
Channel0. When disabled,
the Primary Master/Slave
functions are changed to
Auto and cannot be
changed.
 Primary Master/Slave PIO
When OnChip IDE Channel0 is set to [Enabled] , you can select a
mode for the primary Master and Slave PIO. Select from Auto , or Mode 1
through Mode 4 .
 Primary Master/Slave UDMA
When OnChip IDE Channel0 is set to [Enabled] , you can disable the
primary Master and Slave UDMA or set it to [Auto] .
 IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
 Serial-ATA Controller
This function allows you to enable specific SATA controllers, enable all
controllers, or disable all controllers. The options available are [SATA-0] ,
[SATA-0+1] , [Enable All] , and [Disabled] .
 IDE Prefetch Mode
Use this function to enable or disable the IDE Prefetch mode .
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]

XFX nForce 780i 3-Way SLI Specifications

General

Brand	XFX
Model	nForce 780i 3-Way SLI
Category	Motherboard
Language	English