Configuring the BIOS
61
IRQ Resources
To enable this field for input, set
Resources Controlled By
to
[Manual]
. With this field enabled, press
Enter
to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus
specification. Use PCI/ISA PnP for devices compliant with the plug-and-play
standard, whether designed for PCI or ISA Bus architecture.
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or
disable the Palette Snoop function.
Maximum Payload Size
This function on the PnP/PCI Configuration menu allows you to set the
maximum TLP payload size (in bytes) for the PCI Express devices. Use the
Page Up
and
Page Down
keys to scroll through sizes or enter the number using
the keyboard numbers or use the
+
and
–
keys to go up and down the list of
sizes.
IRQ-5 assigned to [PCI Device]
IRQ-9 assigned to [Reserved]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
To Next Page
Loading...
Need help?
General
