4
HOST PORTS
Fig 1-3 Tablet Host Ports
1
DOIP port: Supports ECU programming for vehicles with DOIP
protocol. (Doesn’t support in D9 Smart Diagnosis System)
2
USB 3.0 port: Used for data transfer for tablet & PC
communication, and data transfer with VCI box when working on
immobilizer reset process.
3
VGA port: Diagnostic communication port, which can be used for
OBD connection.
4
DC charging port: Charging port, connected to the power adapter
to charge the device.
5
Power button: Long press to turn the device on/off, short press to
switch the device into sleep mode. Hold for about 20 seconds to
force shut down the device.
To Next Page
Loading...
Need help?
General
