40
SEAT CALIBRATION
This function is suitable for the matching of replacement and
maintenance seats with memory functions. After the seat fails or is
replaced or repaired, it is generally necessary to use this function to
match the seat.
Needed for cars with seats with memory function, general gasoline cars don’t need.
HEADLIGHT
This function is used to initialize the adaptive headlight system. It
refers to the adaptive front lighting system (when using bi-xenon
headlights at night), it can be rotated to the sides, pressing the button
means that they remain direct, and do not turn when you turn. After
replacing the headlights, the adaptive headlight system needs to be
matched.
ECU CONFIGURATION
When a car with a high-level configuration and a car with a low-level
configuration share the same ECU, or you need to change or add
some features unique to the high-end vehicles, you can use this
function to support the activation of the hidden functions of the car
(except those that are not supported by the hardware). Different
hidden functions may require different operation steps, please be sure
to operate under the guidance.
Cautions!
The functions that the original ECU must support can be flashed
out.
To Next Page
Loading...
Need help?
General
