39
*Cautions!
Before resetting the gearbox, please check the gearbox control unit to
ensure that there is no fault code. If there is a fault code, the gearbox
memory function cannot be reset. Please road test after reset.
SUSPENSION
This function can adjust the height of the vehicle’s body. When
replacing the body height sensor in the air suspension system, or
control module or when the vehicle level is incorrect, you need to
perform this function to adjust the body height sensor for level
calibration.
The air suspension system reset function enables the tablet ECU to
match the current air suspension system information, thereby ensuring
the normal damping effect of the vehicle when driving.
Application scenarios:
The shock absorber is not the same height due to air leakage,
maintenance, replacement, etc.;
After replacing the air pump assembly;
After replacing the electronic control module.
WINDOWS INITIALIZATION
This function is to match the windows to restore the initial memory of
the ECU and restore the automatic raising and lowering functions of
the power window. Usually, when the vehicle window fails or after
replacing the window glass, we need to use this function to initialize
the car window.
To Next Page
Loading...
Need help?
General
