5
VCI BOX
To communicate with the vehicle via OBD, D9 also comes up with a
VCI box. The tablet needs a Bluetooth connection with the VCI box to
get access to all the immobilizer & diagnosis software.
Although some functions (like EEPROM Adapter) will not need you to communicate to
the vehicle, please power up the VCI box using a 12V power adapter to get access to the
software.
FRONT/BACK VIEW OF VCI BOX
Front Back
Fig 1-3/1-4 VCI box front/back View
1
Display Screen: Show status of the VCI box-like battery voltage,
Bluetooth connection, and car communication status.
2
Nameplate: Show basic information about the VCI box, like the
serial number.
Make sure that you’re using the VCI box that is paired with the tablet, or it will not
communicate. The serial number of the VCI box must be the same as the serial
number of the tablet.
To Next Page
Loading...
Need help?
General
