Xylem EXO Series User Manual

pg | 50
GPS
Upon startup of the Handheld, the GPS function automatically initiates a x of the location. is may take
some time. During this process, the Handheld should remain stationary and have a clear view of the sky. e
rst time a user powers on the Handheld, the GPS x can take up to a maximum of 20 minutes to obtain.
Enable GPS.
To manually enable GPS, go to the Options menu. Select
Handheld | Enable GPS | On. Click Apply. When GPS is
xed, a signal strength icon with green bars will appear. If
the bars are black, then no GPS signal is found.
Turn on/off GPS.
e GPS consumes battery power and can be turned o to
conserve battery life. To manage the GPS, go to the Options
| Handheld | GPS menu and select On or O.
To display GPS units on screen, go to the Options | Units
menu and select GPS Lati and GPS Long. When units are
selected, GPS data is displayed on screen only if the GPS is
turned on.
If the Handheld is stored for more than 10 days without
batteries installed, then the user will need to re-enter the
date and time. Additionally, it will take longer for the unit
to obtain a new GPS x.
3.8

Xylem EXO Series Specifications

General

Brand	Xylem
Model	EXO Series
Category	Measuring Instruments
Language	English