Operation Multi 3630/3620 IDS
14 ba77045d02 03/2020
4.2.4 Overview of the OxiTop
®
-IDS measuring heads in a sample
The details of the OxiTop
®
-IDS measuring heads registered for a sample are
listed in the overview of samples in the set and can be viewed by selecting a
sample with <><> and displaying it with <MENU/ENTER>.
1 Sample name
2 Number of the OxiTop
®
-IDS measuring head (set at the OxiTop
®
-
IDS measuring head)
3 Check mark (
= finished):
when the data of the measuring head have been transmitted to the
meter at the end of the specified Duration
4 Series number of the OxiTop
®
-IDS measuring head
5 Measured value
(last value transmitted by the measuring head in the specified
interval)
– Asterisk (* = Alarm diff. pressure exceeded):
if the Alarm diff. pressure in the OxiTop
®
-IDS measuring head is
exceeded (only for Measuring mode: Pressure p)
6
GLP
(valid calibration available during start of measurement)
7/[
i
]: the LED at the highlighted OxiTop
®
-IDS measuring head lights
up red for a short time.
8 <F2>/[Delete]: deletes the highlighted OxiTop
®
-IDS measuring head
from the sample
12
020190001 123 mg/l GLP
13 020190015 125 mg/l GLP
21 020190123 127 mg/l GLP
79 Free meas. heads
Sample A-1
15.03.2020 08:00
Delete
i
1
8
7
254
3
6
To Next Page
Loading...
Need help?
General
