Operation with OxiTop
®
-IDS measuring heads Multi 3630/3620 IDS
28 ba77045d02 03/2020
4
Carry out one of the following actions:
Using <MENU/ENTER>, display the individual measuring heads of
the selected sample. There you can
– View the data of the individual measuring heads that were last
stored
–View GLP (if there is a valid calibration) and the remaining valid-
ity (in days)
– Make the LED of the corresponding measuring head light up with
<F1>/[
i
]
– Delete individual measuring heads from the sample as neces-
sary with <F2>/[Delete]
Using <F1>/[
i
], display the graphic evaluation of the sample
Erase the highlighted sample with <F2>/[Delete]
1 Set name, Sample name and type
2 Mean value, standard deviation (with more than 2 measuring heads),
number of measuring heads in the sample
3 Line (red): Upper limit of measuring range
4 Red rectangle with white lettering:
ID of the measuring head that belongs to the highlighted (red) graph
5 Graphs (blue and red):
Graphic display of the measured values of all measuring heads of
the sample
6 Red graph: highlighted graph.
The ID of the relevant measuring head is displayed in the red rect-
angle (4).
7 Softkey and date/time
363 mg/l 210 mg/l 3
79 Free meas. heads
190216-1 A-1 BOD5
15.03.2020 08:00
1
2
3
4
7
Hide
6
5
To Next Page
Loading...
Need help?
General
