Yaesu ADMS-15 User Manual

• O󰀨set Direction
Set the frequency shift direction.
OFF: The transmit frequency is not shifted.
-RPT: The transmit frequency is shifted to the minus o󰀨set.
+RPT: The transmit frequency is shifted to the plus o󰀨set.
• AUTO MODE
When tick the check box of AUTO MODE, the receive mode (FM mode or AM mode) is automatically se-
lected. Un-ticking the checkbox enables selecting the operating mode.
• Operating Mode
Select the operating mode for receive channel.
FM: The selected frequency band is set to FM mode.
AM: The selected frequency band is set to AM mode.
• DIG/ANALOG
The AMS, V/D mode (DN), the Voice FR mode (VW) and the ANALOG mode (FM/AM mode) are select-
able.
When the Setup Menu [14 DIGITAL VW] is set to “ON”, the Voice FR mode (VW) can be select-
ed.
• Tone Mode
This item selects the Audio Squelch Code type.
• CTCSS Frequency
This item selects the Tone Frequency of the Tone Squelch.
• DCS Code
Select the DCS code when DCS is set.
• User CTCSS
Select the idle line frequency to remove signals such as idle line signals used by private railways and
control signals of MCA radio system.
• RX DG-ID
Select the receiving DG-ID number.
• TX DG-ID
Select the transmitting DG-ID number.
27

Yaesu ADMS-15 Specifications

General

Brand	Yaesu
Model	ADMS-15
Category	Two-Way Radio
Language	English