69
Restoring to Defaults (Reset)
Caution
When the All Reset function is performed, all data registered in the memory will be
deleted. Be sure to note the settings on paper or back up the data on a microSD
memory card. For details on how to save backup onto a microSD memory card.
All Reset
To restore all transceiver settings and memory content to the factory defaults.
1. Turn the transceiver OFF.
2. Press and hold the [F ] key, the [A/B] key and the [BAND] key and turn the
transceiver ON simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
•
The beep will sound, and the transceiver will reset all factory defaults.
•
After resetting all defaults, the call sign input message appears on the LCD. Set
the call sign.
•
To cancel the resetting, touch [CANCEL].
Setup Menu Reset
All the Setup Menu only, settings can be restored to the default settings.
1. Turn the transceiver OFF.
2. Press and hold the [F ] key and the [A/B] key and turn the transceiver ON
simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
•
The beep will sound, and the transceiver will reset all Setup Menu settings are
reset to defaults.
•
To cancel the resetting, touch [CANCEL].
•
To reset all the following items, perform All Reset (see above).
[DISPLAY]
8 OPENING MESSAGE
[SIGNALING]
1 BELL
2 DCS CODE
3 DCS INVERSION
5 DTMF MEMORY
6 PAGER
7 PR FREQUENCY
9 SQL S-METER
11 SQL TYPE
12 TONE SQL FREQ
[WIRES-X]
1 RPT/WIRES FREQ
2 SEARCH SETUP
3 EDIT CATEGORY TAG
[CALLSIGN]
CALLSIGN
[TX/RX]
1-1 ANTENNA ATT
1-2 FM DEVIATION
1-3 RX MODE
2-4 DIGITAL VW
[SCAN]
5 SCAN WIDTH
[CONFIG]
6 CLOCK TYPE
12 PASSWORD
15 RPT SHIFT
16 RPT SHIFT FREQ
18 STEP
[OPTION]
2 Bluetooth
3 DEVICE LIST
4 Bluetooth AUDIO
[MEMORY]
1 BANK LINK
2 BANK NAME
3 MEMORY NAME
5 MEMORY SKIP
[GM]
1 DP-ID LIST
[APRS]
6 APRS MSG GROUP
7 APRS MSG TEXT
13 BEACON INFO
15 BEACON STATUS TEXT
17 COM PORT SETTING
18 DIGI PATH
19 GPS SETUP
23 CALLSIGN (APRS)
24 MY POSITION
25 MY SYMBOL
To Next Page
Loading...
Need help?
General
