Yaesu FTA-450L User Manual

FTA-450L OperATing MAnuAL
47
sCannIng operatIon
The
FTA-450L
allows you to scan active channels au-
tomatically in the COMM (COM band), MR, and WX
modes. It pauses on signals received, so you can talk to
the station(s) on the frequency received.
Scanning Channels
1. Set the radio to the COMM mode.
2.
Press the
[
MENU
]
key to display the
MENU
screen .
3. Select
“
FUNC
” on the screen by pressing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
4. Select “
SCAN
” on the
screen by pressing the
[
◄
]
or
[
►
]
key, and
then press the
[
ENT
]
key.
SCAN MEM
DUAL WATCH
SCAN
OFF
OFF
OFF
FUNCTION
The scanning starts and the display returns to the
COMM mode screen.

The scanner searches signals from the lowest fre-
quency to highest.

When the scanner encounters a signal, the scanning
pauses and the radio remains on that channel until
the signal disappears, and the frequency indication
on the display blinks.

After the signal disappears, scanning resumes.

To stop scanning, press
the
PTT
switch, or se-
lect “
SCAN
” again in
the
FUNCTION
menu.
SCAN MEM
DUAL WATCH
SCAN
OFF
OFF
ON
FUNCTION
Next time the scanning is activated, the search will
start from the frequency at which the scanning was
stopped last time.

Yaesu FTA-450L Specifications

General

Brand	Yaesu
Model	FTA-450L
Category	Transceiver
Language	English