Setting Up
EZ-300 Owner’s Manual
16
Adjusting the Master Volume
To adjust the volume of the entire keyboard sound,
use the [MASTER VOLUME] dial while playing the
keyboard.
Connecting Headphones or
External Speaker
Connect a pair of headphones to the [PHONES/
OUTPUT] jack. This jack also functions as an exter-
nal output. By connecting to a computer, keyboard
amplifier, recorder, or other audio device, you can
output the audio signal of this instrument to that
external device. The speakers of this instrument are
automatically shut off when a plug is inserted into
this jack.
Using a Pedal (Footswitch)
You can control three functions: Sustain, Articulation
(page 27), and Arpeggio (page 29) as you play by
pressing a footswitch (FC5 or FC4A; sold separately)
plugged into the [SUSTAIN] jack. By default, Sustain
is assigned, so that the sound can be heard for a
long time even if you take your finger off the keyboard
while pressing the footswitch, like a damper pedal on
a piano. To use a function other than Sustain, use
the function settings (Function 029; page 61).
Using the Music Rest
Insert the music rest into the slots as shown.
• Do not use the instrument for a long period of time at a
high or uncomfortable volume level, since this can cause
permanent hearing loss.
• Do not use the instrument or headphones for a long period
of time at a high or uncomfortable volume level, since this
can cause permanent hearing loss.
• Before connecting the instrument to other electronic com-
ponents, turn off the power of all the components. Also,
before turning any components on or off, make sure to set
all volume levels to minimum. Otherwise, damage to the
components or electrical shock may occur.
• To avoid possible damage to the external device, first turn
on the power to the instrument, then to the external
device. When turning off the power, do so in reverse order:
first turn off the power to the external device, then to the
instrument.
• When connecting the headphones or external speaker to the
instrument, set the Master EQ (page 55) to “2 Headphone.”
The Master EQ can be set in Function settings (page 61;
Function 025).
Standard stereo
phone plug
• Plug or unplug the footswitch while the power is off. Also, do
not press the footswitch when turning the power on. Doing so
changes the polarity of the footswitch, resulting in reversed
operation.
• The Sustain function does not affect Split Voices (page 25) or
the Styles (Auto Accompaniment; page 44).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
