EZ-300 Owner’s Manual
59
Backup and Initialization
The following Backup parameters will be maintained
even if the power is turned off.
In addition to the Backup parameters above, all the
data (including Style data that have not been loaded)
transferred from the connected computer will be
maintained even if you turn off the power.
Backup parameters other than “Passing Status of
Keys to Success” can be transferred and saved to a
computer as a single Backup file (with the extension:
.BUP). This backup file can be loaded to the instru-
ment for future.
For details on using a computer with this instrument,
refer to “Computer-related Operations” on the web-
site (page 8).
Error during Backup Operation
When connecting to a computer with Storage Mode
(Function 059; page 63) set to on, the memory space
on the instrument may be insufficient for creating a
backup file for transferring to the computer. In this sit-
uation, the error message “Not enough storage for
backup” scrolls on the display. If you want to save a
backup file to the computer, delete unnecessary
Song files or Style files on this instrument to ensure
sufficient memory space, and then set Storage Mode
to off and back to on again. A backup file will be cre-
ated.
If you do not save a backup file on the computer,
there is no problem if an error message is displayed,
and you can ignore the message.
You can initialize your original data via the following
two methods.
Backup Clear
This operation initializes the backup parameters and
the Registration Memories.
While holding down the highest white key, press the
[ ] (Standby/On) switch to turn the power on.
Flash Clear
This operation deletes all the Songs and Styles that
have been transferred from a computer. Note that
Style data registered to Style numbers 206–215 will
be maintained. While simultaneously holding the
highest white key and the three highest black keys,
press the [ ] (Standby/On) switch to turn the power
on.
Backup Parameters
Parameters backed up as needed
• User Songs (page 51)
• Style Number 206–215 (page 50)
Parameters backed up when the power is turned off
• Registration Memory (page 53)
• Passing Status of Keys to Success (page 37)
• Function Settings: (page 60)
Tuning, Split Point, Touch Response, Style Volume,
Song Volume, Metronome Volume, Your Tempo,
Demo Group, Demo Play Mode, Master EQ type,
Sustain, Auto Power Off, Battery Type, Guide,
Audio Loop Back, Fingering Type, [AUX IN] Audio
Volume, [USB TO HOST] Audio Volume, Style
Freeze, Transpose Freeze, Voice Freeze
• Backup is executed automatically when the power is
turned off. When the power is turned off in the following
cases, backup is not executed.
- Disconnected AC adaptor
- Power failure
- Low or no battery power
• The size of a backup file varies depending on the amount of
data stored on the instrument. The maximum capacity is
about 620KB.
• Even if a backup file for transferring to a computer is not cre-
ated, the backup data is retained in the instrument.
Initialization
• Keep in mind that Backup Clear and Flash Clear also
delete the data you have purchased. Be sure to save the
important data to a computer.
The highest white key
and the three highest
black keys
To Next Page
Loading...
Need help?
General
Weight and Dimensions
