1-3
UNCRATING PROCEDURE
(FOR TYPICAL STEEL FRAME)
Wear gloves to avoid injury by sharp steel
edges while uncrating.
This is an example of the steel crate for V6
models.
For other steel crate models, refer to this pro-
cedure for uncrating the steel frame.
1. Inspect the crate for shipping damage. If
any damage has been found, consult your
Yamaha dealer.
2. Cut the strap (1).
3. Lift the top cover (2) straight up to remove.
4. Remove the bottom bolts (3).
5. Lift the top frame (4) straight up.
6. Remove the wrapping (5), and inspect the
outboard motor for concealed damage. If
any damage is found, consult your Yamaha
dealer.
To be continued.
To Next Page
Loading...
Need help?
General
