Instrument and control functions
6-1
6
EAUN0264
Main switch/steering lock
(for GDS125-I)
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
main switch positions are described
below.
The main switch/steering lock is
equipped with a keyhole shutter. (See
page 6-2 for keyhole shutter opening
and closing procedures.)
EAU65810
ON
All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.
The meter lighting, taillight, license
plate light and auxiliary light come
on automatically when the key is
turned to “ON”.
The fuel pump can be heard when
the key is turned to “ON”.
EAU10662
OFF
All electrical systems are off. The key
can be removed.
EWA10062
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
EAUU1043
LOCK
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the “OFF”
position, and then turn it to
“LOCK” while still pushing it.
3. Remove the key.
If the steering will not lock, try turning
the handlebars back to the right slight-
ly.
1. Push.
2. Turn.
UB4HEZE0.book Page 1 Wednesday, March 21, 2018 2:58 PM
To Next Page
Loading...
Need help?
General
