71 En
Customizing this unit (MANUAL SETUP)
ADVANCED
OPERATION
English
Use the remote control to access and adjust each
parameter.
y
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• Press
E
RETURN to return to the previous menu level.
1 Set the operation mode selector to
K
AMP
and then press
N
SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
2 Press
D
k / n to select “MANUAL SETUP”
and then
D
ENTER to enter “MANUAL
SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
3 Press
D
k / n repeatedly and then press
D
ENTER to select and enter the desired
menu.
The following displays are examples where “SOUND
MENU” is selected.
4 Press
D
k / n repeatedly and then press
D
ENTER to select and enter the desired
submenu.
The following display is an example where “LFE
LEVEL” is selected.
5 Press
D
k / n to select the desired parameter
and then
D
l / h to change the parameter
settings.
6 Press
N
SET MENU to exit from “SET
MENU”.
Using SET MENU
SET MENU
.;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
MANUAL SETUP
. 1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
MANUAL SETUP
1 SOUND MENU 1/2
. A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)EQUALIZER
E)LFE LEVEL
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
MANUAL SETUP
1 SOUND MENU 2/2
. F)DYNAMIC RANGE
G)AUDIO SET
H)HDMI SET
I)EXTD SUR.
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
SOUND MENU
E)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
[ ]/[ ]:Up/Down
p
p
p
[
[ ]/[ ]:Adjust
To Next Page
Need help?
General