Name: Yamaha RX-V661
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

87 En

Remote control features

ADVANCED

OPERATION

English

You can control other components by setting the

appropriate remote control codes. For a complete list of

available remote control codes, refer to “List of remote

control codes” at the end of this manual.

Remote control code default settings

You may not be able to operate your Yamaha component even if a

YAMAHA remote control code is preset as listed above. In this

case, try setting another YAMAHA remote control code.

1 Press one of the input selector buttons (

)

on the remote control to select the input area

you want to set up.

2 Press

CODE SET using a ballpoint pen or

a similar object.

The

TRANSMIT indicator on the remote control

flashes twice, and the selected input selector button

lights up.

3 Press the numeric buttons (0 to 9) (

) to

enter the five-digit remote control code for

the component to be used.

The

TRANSMIT indicator on the remote control

flashes twice, and the remote control code for the

selected component is set.

Refer to “List of remote control codes” at the end of this

manual.

• If the manufacturer of your component has more than one

code, try each of them until you find the correct one.

• If you do not press any buttons within 30 seconds in step

3, the setup process is canceled. If this happens, repeat the

setup procedure.

• If you enter the code number “9980”, the remote control

code previously set for the selected input area is cleared.

Setting remote control codes

Input

source

Component

Yamaha RX-V661 User Manual

Table of Contents

Other manuals for Yamaha RX-V661

Questions and Answers:

Yamaha RX-V661 Specifications

Related product manuals

Brand	Yamaha
Model	RX-V661
Category	Receiver
Language	English