82 En
Customizing this unit (MANUAL SETUP)
■ Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
• Select “OFF” to turn off the “MEMORY GUARD”
feature.
• Select “ON” to protect:
– sound field program parameters
– all “SET MENU” items
– all speaker levels
– SCENE template parameters
When “MEMORY GUARD” is set to “ON”, you cannot select
and adjust any other “SET MENU” items.
■ Audio select C)AUDIO SELECT
Use this feature to designate the default audio input jack
select setting for the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate audio input jack select setting.
• Select “LAST” if you want this unit to automatically
select the last audio input jack select setting used for
the connected input source.
■ Parameter initialization D)PARAM.INI
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound
field
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: CLASSICAL, LIVE/CLUB,
ENTERTAINMENT, MOVIE, STEREO,
ENHANCER, SUR. DECODE
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
“MEMORY GUARD” is set to “ON”.
■ Zone 2 settings E)ZONE2 SET
Zone 2 Maximum volume MAX VOL.
Use this feature to set the maximum volume level in the
Zone 2.
Control range: 16.5 dB, 15.0 dB to – 30.0 dB
Control step: 5.0 dB
• The “MAX VOL.” setting takes priority over the “INI VOL.”
setting. For example, when “INI VOL.” is set to –20.0 dB and
then “MAX VOL.” is set to –30.0 dB, the volume level is
automatically set to –30.0 dB when you turn on the power of
this unit next time.
• The “MAX VOL.” setting does not affect the output level at the
“ZONE 2 OUT” jacks.
Note
OPTION MENU
B)MEMORY GUARD
>OFF ON
[ ]/[ ]:Select
[ENTER]:Return
[
[
OPTION MENU
C)AUDIO SELECT
>AUTO LAST
[ ]/[ ]:Select
[ENTER]:Return
[
[
Notes
Notes
OPTION MENU
D)PARAM. INI
CLASSICAL
LIVE/CLUB
*ENTERTAINMENT
*MOVIE
STEREO
SUR. DECODE
ENHANCER
Press DSP Key
OPTION MENU
E)ZONE2 SET
. MAX VOL.;+16.5dB
INI.VOL.;;;;;OFF
[ ]/[ ]:Up/Down
[ ]/[ ]:Select
p
p
[
[
To Next Page
Loading...
Need help?
General
