INCLUDED PARTS
1-8
EAS1SL5016
INCLUDED PARTS
EAS1SL5017
SIDESTAND
The sidestand “1” is used to support only the
machine when standing or transporting it.
EWA@
• Never apply additional force to the sides-
tand.
• Remove this sidestand before starting out.
EAS1SL5018
SPARK PLUG WRENCH
The spark plug wrench “1” is used to remove or
install the spark plug.
EAS1SL5019
NIPPLE WRENCH
The nipple wrench “1” is used to tighten the
spoke.
EAS1SL5020
HANDLEBAR PROTECTOR
Install the handlebar protector “1” with the mark
“a” facing forward.
EAS1SL5021
FUEL HOSE JOINT COVER
The fuel hose joint covers “1” are used to pre-
vent mud, dust, and other foreign materials
from entering the inside when the fuel hose is
disconnected.
EAS1SL5022
COUPLER FOR CONNECTING OPTIONAL
PART
The coupler “1” is used for connecting the op-
tional Power Tuner and so on.
ECA1DX1002
When no optional parts, etc. are connected,
connect the connection terminal to the orig-
inal coupler.
Before disconnecting the coupler, thor-
oughly wipe off any mud or water stuck to it.
To Next Page
Loading...
Need help?
General
