62
11. ACCESSORY OPTIONS
Accessory Item List
DF412/612, DH412/612 Precision Ovens are compatible with a wide variety of available options, shown
in Tables 11.1, 11.2.1 and 11.2.2.
Options listed in Table 11.2.1 and 11.2.2 are required to be installed at the Yamato manufacturing facility
or to be retrofitted by a qualified technician.
Table 11.1 Options List (factory installation not required)
Chamber Rack (stainless
steel wire) with supports
Same as standard racks; available
for additional purchase.
Chamber Rack (perforated
stainless steel) with
supports
Capacity: approx. 30kg/ea.
Perforated stainless steel chamber
racks.
Basket Style Rack
Containter (stainless steel
mesh)
Capacity: approx.15kg/ea.
30mm deep rack container
constructed from stainless steel
mesh (3 mesh panels); for
processing smaller
samples/specimens.
Designed to be stacked on standard
stainless steel wire racks.
Stand for DF/DH series ovens.
Stand for DF/DH series ovens with
the addition of four caster wheels and
two leveling feet on front.
Hardware for securing an upper and
lower DF/DH412, DF/DH612 units by
stacking them them vertically.
Hardware may be used for stacking
DF/DH412 with previous model
DF/DH4xx and DF/DH612 with
previous model DF/DH6xx. Be
advised that newer models should be
stacked in the top position
Sheath Sensor
(K thermocouple)
Additional temperature sensor for
confirming temperature in chamber
or temperature of samples.
May be connected to optional
memory recorder.
Silicon Plug (for 1 opening)
Silicon rubber plug for sealing gaps
caused by sensors inserted into
cable port.
To Next Page
Loading...
Need help?
General
