Yealink SIP-T19P User Manual

Customizing Your Phone
45
Physically connect your headset and activate the headset mode for use. For more
information on physically connecting a headset, refer to Phone Installation on page 11.
To activate the headset mode:
1. Press on the phone.
The headset icon on the idle screen indicates that the headset mode is activated.
Press the Answer soft key to answer a call. The call will connect to your headset
automatically. Enter the desired number and press the Send soft key, then the
phone will place a call using the headset automatically. For more information on
using the headset to place a call, refer to Placing Calls on page 59.
To deactivate the headset mode:
1. Press again on the phone.
The headset icon disappears from the idle screen indicates the headset mode is
deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm