Yealink SIP-T19P User Manual

Advanced Phone Features
85
This chapter provides operating instructions for the advanced features of the SIP-T19P IP
phone. Topics include:
 Hot Desking
 Intercom
 Multicast Paging
 Music on Hold
 Messages
If you require additional information or assistance with your new phone, contact your
system administrator.
Hot desking originates from the definition of being the temporary physical occupant of
a work station or surface by a particular employee. A primary motivation for hot
desking is cost reduction. This feature is regularly used in places where not all the
employees are in the office at the same time, or not in the office for very long at all,
which means actual personal offices would be often vacant, consuming valuable space
and resources.
You can use hot desking on the SIP-T19P IP phone to log out of the existing account and
then log into a new account, that is, many users can share the phone resource in
different time. To use this feature, you need to configure a hot desking key in advance.
Note
To configure a hot desking key via web user interface:
1. Click on DSSKey->Programmable Key.
2. Select the desired programmable key.
Hot desking is not available on all servers. Contact your system administrator for more
information.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm