Yealink SIP-T19P User Manual

User Guide for the SIP-T19P IP Phone
64
To view placed calls list when the phone is in the pre-dialing screen:
1. Pick up the handset or press the speakerphone.
The LCD screen displays the placed calls list. You can press or to select
the desired entry and then place a call to the contact.
You can use auto answer to automatically answer an incoming call.
To configure auto answer via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Account.
2. Press the Enter soft key.
3. Press or , or the Switch soft key to select Enable from the Auto Answer
field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm