Name: Yealink SIP-T23P
Brand: Yealink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

User Guide for the SIP-T23P/G IP Phone

108

To configure the forward authorized numbers via web user interface:

1. Click on Features->Forward & DND.

2. Select Enabled from the pull-down list of Forward Emergency.

3. Enter the numbers in the Forward Authorized Numbers field.

For multiple numbers, enter a comma between every two numbers.

4. Click Confirm to accept the change.

When call forward is enabled on the phone, the phone cannot forward incoming

calls from the numbers specified in the Forward Authorized Numbers field.

Note

To disable call forward in phone mode:

Do one of the following:

- Press when the phone is idle.

- Press Menu->Features->Call Forward.

Press or to select the desired forwarding type and then press the Enter

soft key.

Press or , or the Switch soft key to select Disabled to disable the call

forward.

Press the Save soft key to accept the change.

Forward authorized number is configurable via web user interface only.

Other manuals for Yealink SIP-T23P

Questions and Answers:

Need help?

Do you have a question about the Yealink SIP-T23P and is the answer not in the manual?

General