EasyManuals Logo
Home>Yealink>IP Phone>SIP-T23P

Yealink SIP-T23P User Manual

Yealink SIP-T23P
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
User Guide for the SIP-T23P/G IP Phone
102
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When DND is enabled on the phone, the phone can still receive incoming calls from the
numbers specified in the DND Authorized Numbers field.
Note
You can configure your phone to forward incoming calls to another party through static
forwarding. You can also forward calls while your phone is ringing; refer to Dynamic
Forwarding.
Static Forwarding
Three types of static forwarding:
Always Forward: Incoming calls are immediately forwarded.
Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
No Answer Forward: Incoming calls are forwarded if not answered after a period
of time.
You can enable/disable call forward for the phone system, or you can customize call
forward for each or all accounts. Two call forward modes:
DND authorized number is configurable via web user interface only.

Other manuals for Yealink SIP-T23P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T23P and is the answer not in the manual?

Yealink SIP-T23P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Display resolution132 x 64 pixels
Ethernet LAN (RJ-45) ports2
Security algorithmsHTTPS
Ethernet LAN data rates10, 100 Mbit/s
Voice codecsCNG, G.711a, G.722, G.726, G.729ab, VAD
Phonebook capacity1000 entries

Related product manuals