Yealink SIP-T23P User Manual

User Guide for the SIP-T23P/G IP Phone
156
3. Enter the desired number in the BLA Number field.
4. Click Confirm to accept the change.
This section provides you with detailed information on using the SIP-T23P/G IP phone in a
BLA scenario. In a BLA scenario, the status of the line key LED which associates with a
bridged line will change. For more information on line key LED indicators, refer to LED
Instructions on page 14.
You can do the following using the IP phone in a BLA scenario:
 Placing calls
 Answering calls
 Place a call on hold
 Retrieving a held call
You can have one call or multiple calls on the bridged line.
To place a call on the bridged line:
Do one of following:
- Enter the desired number using the keypad when the phone is idle.
Press , , or the Send soft key.
The phone will dial the entered number.

Yealink SIP-T23P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Display resolution	132 x 64 pixels
Ethernet LAN (RJ-45) ports	2
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Voice codecs	CNG, G.711a, G.722, G.726, G.729ab, VAD
Phonebook capacity	1000 entries