Name: Yealink SIP-T23P
Brand: Yealink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

User Guide for the SIP-T23P/G IP Phone

The phone status is displayed on the first page of the web user interface.

If your phone cannot contact a DHCP server for any reason, you need to configure

network settings manually. The IP phone can support either or both IPv4 and IPv6

addresses.

To configure the IP mode via phone user interface:

1. Press Menu->Settings->Advanced Settings (default password: admin)

->Network->WAN Port.

2. Press or to select IPv4, IPv6 or IPv4 & IPv6 from the IP Mode field.

3. Press the Save soft key to accept the change or the Back soft key to cancel.

You can configure a static IPv4 address for the IP phone. Before configuring it, make sure

that the IP mode is configured as IPv4 or IPv4 & IPv6.

To configure a static IPv4 address via phone user interface:

1. Press Menu->Settings->Advanced Settings (default password: admin)

->Network->WAN Port.

Other manuals for Yealink SIP-T23P

Questions and Answers:

Need help?

Do you have a question about the Yealink SIP-T23P and is the answer not in the manual?

General