Customizing Your Phone
55
You can search for a contact from the desired lists when the phone is on the dialing
screen. The lists can be Local Directory, History, Remote Phone Book and LDAP.
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and then click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of search results, select the desired list and then click
or .
The LCD screen will display search results in the adjusted order.
6. Click Confirm to accept the change.
Note
To search for a contact in the enabled search source lists:
1. Pick up the handset, press the Speakerphone key or press the line key.
2. Enter a few continuous characters of the entry’s name or continuous numbers of the
entry’s phone number (office, mobile or other number) using the keypad.
Search source list in dialing is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
