User Guide for T4 Series IP Phones
154
Menu->Features->Anonymous Call.
2. Select a desired line.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, select a desired line from the Line
ID field.
3. Select Enabled from the Local Anonymous field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Local Anonymous field.
4. (Optional.) Select the desired value from the Send Anony Code (Send Anonymous Code)
field.
5. (Optional.) Enter the anonymous call on code and off code respectively in the On Code and
Off Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
6. Press Save.
Anonymous call is configurable via web user interface at the path Account->Basic.
Placing an Anonymous Call
Procedure:
1. Using the specific line which has been configured with anonymous call feature to place a
call to phone B.
The LCD screen of phone B prompts an incoming call from anonymity.
Downloaded from ManualsNet.com search engine