Call Features
352
Attributes Description
Prefix Specify the number to be replaced.
Replace Specify the alternate string instead of what the user enters.
LineID
Specify a registered line to apply the replace rule.
Valid Values: 0~16
0, 1 (for CP920)
0 stands for all lines;
1~16 stand for line1~line16 (vary by phone models:
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 1~16; T53W/T53/T43U/T42U/T42S/T42G: 1~12;
T41P/T41S/T27G: 1~6; T40P/T40G/T23P/T23G: 1~3; T21(P) E2: 1~2; CP920: 1)
Multiple line IDs are separated by commas.
Note: This is not applicable to T19(P) E2 phones.
Customizing the Replace Rule File
1.
Open the replace rule file.
2.
To add a replace rule, add <Data Prefix="" Replace="" LineID="" / > to the file. Each starts on a new line.
3.
Specify the values within double quotes.
For example,
<Data Prefix="2512" Replace="05922512" LineID="1" / >
4.
Save the changes and place this file to the provisioning server.
Dial Now File Customization
The dial now file helps create multiple dial now rules. At most 100 dial now rules can be added to the IP phone. It is
not applicable to T19(P) E2 phones.
You can ask the distributor or Yealink FAE for dial now file template. You can also obtain the dial now file template
online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Topics
Dial Now File Attributes
Customizing the Dial Now File
Dial Now File Attributes
The following table lists the attributes you can use to add dial-now rules to the dial now file:
Attributes Description
DialNowRule Specify the dial-now number.
LineID
Specify a registered line to apply the dial-now rule.
Valid Values: 0~16
0, 1 (for CP920)
0 stands for all lines;
1~16 stand for line1~line16 (vary by phone models:
T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 1~16; T53W/T53/T43U/T42U/T42S/T42G:
1~12; T41P/T41S/T27G: 1~6; T40P/T40G/T23P/T23G: 1~3; T21(P) E2: 1~2; CP920: 1)
Multiple line IDs are separated by commas.
To Next Page
Loading...
Need help?
General
