Yealink VC400 User Manual

User Guide for the VC400 Video Conferencing System
120
2. Select the desired value from the pull-down list of Auto Recording.
3. Click Confirm to accept the change.
Screenshot
You can capture the screenshot from the camera via the remote control or web user interface.
You need to insert a USB flash drive to the USB port on the VC400 codec to store screenshots
when you are using remote control and make sure the USB feature is enabled. For more
information, please refer to USB Configuration on page 58. You can view, delete or scale the
screenshots via the remote control.
When you capture a screenshot via web user interface, you can save the screenshots to the
computer. The stored screenshot will be saved in .jpg format and named as the captured time
and date. You can view the screenshot using an application capable of viewing .jpg pictures.
Note
The system only supports USB flash drive in FAT32 format.
After the USB flash drive is inserted to the USB port on the VC400 codec and the USB feature is
enabled, the display device will prompt “USB device available, press * to record or press # to
screenshot”.
The icon will appear on the status bar of the display device, and the icon will appear on
the LCD screen of the VCP40 phone.
The system supports capturing one screenshot per second.

Yealink VC400 Specifications

General

Optical zoom	18 x
White balance	Auto, Indoor, Outdoor
Focus adjustment	Auto
Video codecs	H.264, H.264, H.263
Supported video modes	1080p
Supported graphics resolutions	352 x 288, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.711a, G.722
Line-in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
ITU-supported standards	H.323
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
Power consumption (max)	30 W

Weight and Dimensions

Depth	183 mm
Width	330 mm
Height	40 mm