22
Service Device Description Aurora ‘Base’
Aurora Interface and Diagnostics
(AID) Tool
Allows setup, monitoring and troubleshooting of any
Aurora Control.
NOTE: Although the ABC has basic compatibility with all Aurora, new
product features may not be available on older AID Tools.
For Service
(Ver. 2.xx or greater)
Add On Thermostats and Zoning Description Aurora ‘Base’
TP32U03/04 - MonoChrome Traditional
Y1, Y2 Thermostat
Elite Stat with full English fault codes and alerts, traditional Y1, Y2
thermostat, 8 wire installation
Optional
TP32S01/02 -
Traditional Y1, Y2 Thermostat
Traditional Y1, Y2 thermostat, 8 wire installation Optional
TPCM32U03A*/04A* - MonoChrome
Communicating Thermostat
Elite Stat with full English fault codes and alerts, communicating
thermostat, 4 wire installation
Optional
TPCC32U01 - Color Touchscreen
Communicating Thermostat
4.3 in. color touchscreen communicating thermostat with full English
fault codes and alerts, 4 wire installation
Optional
IntelliZone2
®
●
24V Zoning
IntelliZone2
®
● 24V is a communicating zoning system that includes
color main thermostat and up to 4 zones (with dual capacity).
There are 3 thermostat options (MasterStat, SensorStat, ZoneStat).
Includes daughter board to translate communication to 24VAC for
heat pump
Optional
The Aurora™ Control System cont..
LX SERIES INSTALLATION MANUAL
Aurora Control Features Description Aurora ‘Base’
Microprocessor Compressor Control
Microprocessor control of compressor for timings with FP1, HP, LP,
Condensate, assignable Acc relay
•
Base Hot Water Generator Operation
Compressor Contactor powers Hot Water Generator Pump with inline
circuit breaker and thermostat limit.
•
Base Loop Pump Control
Compressor Contactor powers Loop Pump with inline circuit breaker
and no loop pump linking capability.
•
Load Shed/Utility Input
Allows simple input to externally enable of occupied/unoccupied
mode for basic utility time of use programs.
•
To Next Page
Loading...
Need help?
General
