JOHNSON CONTROLS
72
FORM 160.84-OM1
ISSUE DATE: 9/21/2017
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
OVERVIEW
This screen allows definition of general parameters
having to do with the operation of the chiller.
DISPLAY ONLY
Chiller Run Time
Displays the amount of time the chiller has been run-
ning since the last start signal was received. Value is
reset to zero when the chiller enters Coastdown. It re-
mains at zero while shutdown and during “MBC Start-
up”.
Number of Starts
Displays the number of the starts the chiller has initi-
ated.
Operating Hours
Displays the total accumulated run time of the chiller.
PROGRAMMABLE
Control Source
Access Level Required: OPERATOR
Define whether the control of the chiller will be Local,
Digital Remote, Analog Remote, Modem Remote or
BAS (ISN) Remote.
NAVIGATION
Home
Causes an instant return to the Home Screen.
Setup
Return to the Setup Screen.
OPERATIONS SCREEN
LD17942a
FIGURE 27 - OPERATIONS SCREEN
To Next Page
Loading...
Need help?
General
