JOHNSON CONTROLS
73
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
FORM 160.84-OM1
ISSUE DATE: 9/21/2017
3
OVERVIEW
This screen allows the user to browse through the faults.
In order to get a more thorough reporting of the system
conditions at the time of the recorded shutdown, move
to the History Details subscreen.
The user may use the Select Fault button to select the
history to view. At this point the View Details button
is used to jump to a subscreen containing stored chiller
parameters values at the time of the shutdown. Addi-
tionally, the Print History button can be used to gen-
erate a hard-copy report of the parameter values at the
time of the shutdown.
DISPLAY ONLY
Last Normal Shutdown
This window displays the date and time and the de-
scription of the last normal shutdown. A normal shut-
down is defined as:
• Local (Panel rocker switch)
• Remote (Digital, Analog or BAS (ISN))
Last Fault While Running
This window displays the date and time and the de-
scription of the last safety or cycling shutdown while
the system was running.
Last Ten Faults
This window displays a chronological listing (most
recent first) of the date and time and the description
of the last ten safety or cycling shutdowns that occur
while the system is running or stopped.
PROGRAMMABLE
Print History
This generates a report listing the status of the chiller
parameters at the time of the selected shutdown.
Print All Histories
This generates a report listing the status of the chiller
parameters at the time of each of the stored shutdowns.
HISTORY SCREEN
LD17943a
FIGURE 28 - HISTORY SCREEN
To Next Page
Loading...
Need help?
General
